Bar Lights
Batten Lights
Batten Fix Lights(DIY)
Bedside Table Lamps
Cabinet Lights
Ceiling Lights
Chandeliers
Close to Ceiling Light (CTC)
Copper Lights
Emergency Lighting
Fairy Lights
Floor Lamps
High Bay Lights (UFO)
Lamps
Mirror Lights
Oyster Lights
Pendants Lighting
Plaster Wall Lights
Smart Lights
Spot Lights
Table Lamps
Touch Table Lamps
Up/Down Wall Lights
Vanity Lights
Wall Lights
LED Strips
LED Strips Controller
Batten Lights
Bollard Lighting
Brick Lights
Bunker Lights
Coach Lighting
Deck Lights
Driveway Lights
Fairy Lights
Flood Lights
Garden Lighting
Inground Lights
Pathway Lighting
Pillar Mount
Pond Lights
Posts Lights/Top
Outdoor Ceiling Lights
Outdoor Sensor Lights
Outdoor Wall Lights
Solar Lights
Spike Lights
Step Lights
Up/Down Wall Lights
Clearance Sale
LoginCouldn't load pickup availability
The Domus EVAC-D40-MINI is a 1.8 W recessed non-maintained emergency light with a 3-hour duration, D40 classification and self-test, fully compliant to AS/NZS 2293.3. Cutout Ø25 mm.
⛔ Everything that makes this a compliant emergency light is on the datasheet and in no product field. Our record holds four entries.
| Figure | Why it matters | |
|---|---|---|
| Standard | AS/NZS 2293.3 | The compliance basis for the whole installation |
| Duration | 3 hours | ⭐ Longer than other emergency fittings in this catalogue, which run 90–120 minutes |
| Classification | D40 | Sets the spacing between fittings |
| Testing | Self-test | Decides the maintenance regime |
| Battery | LiFePO4 3.2 V 1.8 Ah | Chemistry and replacement |
| Cutout | Ø25 mm | The smallest in this catalogue |
An emergency lighting layout is designed from the classification and the duration — not from a lumen figure. Give these to your electrical designer, and ask us for the datasheet with the quote.
1.8 W recessed non-maintained LED emergency light. Cutout Ø25 mm. 3-hour duration. D40 classification. Self-test. Fully compliant to AS/NZS 2293.3. 130 lm at 4000 K, COB LED, 120° beam, 50,000 hrs. Battery LiFePO4 3.2 V 1.8 Ah with polarity-reversal protection for unfinished sites. 240 V AC, IP20, Class II. White or black.
⛔ The standard, the duration, the classification, the battery, the self-test function and the cutout are all on the datasheet and in no product field. Ask us for the datasheet with the quote — an emergency layout is designed from the classification and the duration, not from a lumen figure. ⛔ No warranty term is recorded — ask us.
Supplied and supported by Lights For You.
AS/NZS 2293.3, fully — stated on its datasheet and on no product field, which is worth knowing because on an emergency light the standard is the whole regulatory basis. Ask us for the datasheet with the quote so your electrical designer has it, along with the 3-hour duration and the D40 classification.
That is not the fitting's question to answer — the required duration comes from the building's classification and your electrical designer, not from the product. What we can tell you is what this one gives and how it compares: 3 hours, where the BOLT emergency battens in this same catalogue give 90 and 120 minutes and their datasheets also state full compliance to AS/NZS 2293. So three hours is longer than the shortest compliant option here, not a baseline. If your design specifies a duration, check it against the datasheet rather than against a rule of thumb.
It sets how far apart the fittings can be. The classification describes the shape and reach of the light on the floor, and AS/NZS 2293.1 turns that into a spacing table — so it is what a designer counts fittings with, far more directly than the 130-lumen output, which on its own says nothing about coverage. Do not substitute a differently classified fitting into a designed layout without re-checking the spacing.
When the fitting is lit. This one is non-maintained: it is off in normal use and comes on only when the mains fails, which is what most Australian emergency lighting is, because the fitting exists to get people out rather than to light the space. A maintained fitting is lit continuously and stays lit on battery — that is for exit signs and for spaces where the emergency fitting doubles as the normal light. If your drawing calls for maintained, this is the wrong fitting.
Ø25 mm, which is the smallest aperture in this catalogue by a wide margin — most emergency lights need 60 to 90 mm. That is deliberate: Domus notes it is commonly fitted into suspended and surface-mounted LED profiles, turning an architectural light line into an emergency-rated one. That solves a real problem, because a corridor lit by a continuous profile normally needs separate emergency fittings breaking the line.
Tell us which profile and we will confirm with Domus. Our aluminium profiles run from 16 mm to 56 mm deep and no source records which of them accept this fitting — so it is worth settling before both have shipped rather than after.
The inspection. AS/NZS 2293.2 requires emergency lighting to be tested on a schedule, and a self-test fitting runs and logs its own discharge test rather than needing someone to key-switch each one — which on a building with many fittings is the difference between a half-day inspection and a walk-round, every time. Note that self-test is not the same as centrally monitored: the fitting knows, but a person still has to look at it.
For unfinished sites, and Domus is explicit about it. Emergency fittings installed early on a construction programme otherwise sit discharging for weeks while the power is off, and arrive at handover already degraded. The polarity-reversal protection switch mode isolates the battery until the job is live. It is a small feature that saves replacing batteries at practical completion.
| Brand | Domus Lighting |
|---|---|
| Model / SKUs | EVAC-D40-MINI — 66047 (White) · 66048 (Black) |
| Type | Recessed non-maintained LED emergency light |
| Standard | ⛔ AS/NZS 2293.3 — datasheet only, in no product field |
| Duration | ⛔ 3 hours — datasheet only |
| Classification | ⛔ D40 — datasheet only; this is what sets fitting spacing |
| Testing | ⭐ Self-test — ⚠ not the same as centrally monitored |
| Cutout | ⛔ Ø25mm — the smallest in this catalogue; ⭐ fits inside LED profiles |
| Wattage / output | 1.8W · 130lm at 4000K · COB LED · 120° beam |
| Battery | LiFePO4 3.2V 1.8Ah — ⭐ polarity-reversal protection for unfinished sites |
| Battery replacement interval | ⚠ Not recorded — ask us; it is a scheduled maintenance item |
| IP / Class | IP20 · Class II — dry interiors, double insulated |
| Voltage | 240V AC |
| Lifespan | 50,000hrs |
| Finishes | White · Black |
| Warranty | ⛔ Not recorded — ask us |
| Design input | Figure | Where it comes from |
|---|---|---|
| Spacing between fittings | D40 classification | ⛔ Datasheet only |
| Battery duration | 3 hours | ⛔ Datasheet only |
| Compliance basis | AS/NZS 2293.3 | ⛔ Datasheet only |
| Ceiling aperture | Ø25mm | ⛔ Datasheet only |
For all warranty claims please ensure you have your proof of purchase at hand, an invoice from your electrician from the installation and check the faulty product is within the applicable warranty period. Warranty is replacement only.
Lights For You is not responsible for damages caused by unprofessional installation, modified products or manipulated by the customer or by any other person not authorised by the manufacturer; as well as by improper use, manipulation and/or short circuits, apparent signs of improper treatment.
Notification of any damages or missing items must be received by Lights For You within seven (7) days of receipt of the product. Please email photos to ashfield@lightsforyou.com.au.
If the product is to be repaired or replaced, it must correspond to the one originally sent by Lights For You and the customer must include the delivery note and/or invoice.
You must lodge a return request via the below request form.
Credits will be issued in the form of store credit or gift voucher and will be equal to the price paid for the product minus the cost of shipping. Store credit vouchers are valid for six months from the date of issuance.
We reserve the right to refuse a return in cases where we cannot be reasonably satisfied that you purchased the product from us or where we are not responsible for the damage in accordance with our Faults & damages policy.
Customers who wish to cancel all or part of an order due to change of mind or incorrectly ordered may do subject to cancelling in within 12 hours, during business hours from time of purchase. Once products have been shipped, you cannot cancel them.
Please refer to the following link to learn more about our policies
Learn MoreThanks for subscribing!
This email has been registered!
| Product | SKU | Product type | Other details |
|---|