Domus Lighting Lighting Accessories Cell-S3 - 3 Light Slotter Frame To Suit Cell Downlight Module Series
Domus Lighting Lighting Accessories Cell-S3 - 3 Light Slotter Frame To Suit Cell Downlight Module Series Lights-For-You 27071 9330772270716
Domus Lighting Lighting Accessories Cell-S3 - 3 Light Slotter Frame To Suit Cell Downlight Module Series
Domus Lighting Lighting Accessories Cell-S3 - 3 Light Slotter Frame To Suit Cell Downlight Module Series Lights-For-You 27071 9330772270716
Loading... + Add to wishlist - Remove from wishlist
Domus Lighting
SKU: 27071

Cell-S3 - 3 Light Slotter Frame To Suit Cell Downlight Module Series

3 Years Warranty
3 Years Warranty
Color: BLACK
$68.00
$91.67
$68.00
Product Description  
Product Description
x

The Domus CELL-S3 is a three-light slotter frame for the CELL downlight module series, 290 × 100 mm, in black or white.

✅ Three apertures in one trim, aligned and evenly spaced by the frame itself.

Setting out three downlights in a row and getting them level, parallel and evenly spaced is fiddly, and any error is visible for the life of the ceiling. A frame does it for you — and reads as a deliberate detail rather than three holes.

⚠ Two figures come from its siblings rather than from its own record. This listing holds only a length, a width and a warranty:

Figure Source
Cutout per aperture Ø70–75 mm The shared frame datasheet
Depth 50 mm ⚠ The CELL-S1 and S2, which are 50 mm

Ask us and we will confirm both with Domus before anyone marks a ceiling.

The slotter frames, and which one suits
Frame Apertures Body
CELL-S1 1 100 × 100 mm
CELL-S2 2 190 × 100 mm
CELL-S3 (this) 3 290 × 100 mm
  • ✅ All three take the same modules and the same aperture size, so they mix in one room and read as one family.
  • ✅ Three in a row is a substantial detail — right over a kitchen island, a long bench, a reception desk, or in a bulkhead where the run wants to read as one object.
  • ⚠ At 290 mm it needs real clearance between joists or battens, and it has to be set out square to the room: a long rectangular trim shows rotation in a way a round one hides.
Mixing modules within one frame
  • ✅ The three apertures do not have to be identical. You can put a 60° module in the centre for general light and 24° modules either side to pick out what is below.
  • ✅ Or mix fixed and tiltable, if the frame accepts both — ask us.
  • ⚠ All three share one aperture line, so they cannot be aimed at wildly different targets. For that, separate fittings are the answer.
  • ✅ And each module is individually replaceable without touching the ceiling.
What a frame is and is not
  • ⛔ A frame is not a light. You need three CELL modules and their drivers — CELL-9 (9 W) or CELL-13 (13 W), in Trio or DALI.
  • ⚠ Three modules is three drivers to house above a 290 mm frame. Check the void, and tell us if it is tight.
  • ✅ The module carries the beam angle — 15°, 24°, 36° or 60° — and the five colour temperatures, including 2700 K.
  • ⚠ Set every module in one frame to the same colour unless you mean them to differ. Three apertures 100 mm apart make a colour mismatch unmissable.
Choosing the finish

Black recedes into the apertures and reduces the apparent glare of the modules behind them; white disappears into a white ceiling. ✅ Match the frame to the modules — over three apertures a mismatch is three times as visible.

Where it works
  • ✅ Over a kitchen island, a long bench or a reception desk.
  • ✅ In a bulkhead, where a run should read as one object.
  • ✅ Where three lights need to be aligned and evenly spaced without careful setting out.
  • ✅ Shallow voids — the S-series is the shallow frame family.
  • ⛔ Not a light — three modules and drivers are separate.
  • ⚠ Set it out square: a 290 mm trim shows rotation.
Specifying it

Three-light slotter frame for the Domus CELL downlight module series. Body 290 × 100 mm. Black or white.

⚠ Cutout Ø70–75 mm per aperture, from the shared frame datasheet — this listing records no diameter of its own. ⚠ Depth taken as 50 mm from the CELL-S1 and S2; this listing records no height either. We will confirm both with Domus before you cut.

⛔ Three CELL modules and their drivers are sold separately — CELL-9 or CELL-13, in 15°, 24°, 36° or 60°, Trio or DALI. ⚠ Allow for three drivers above a 290 mm frame. Warranty 3 years.

Supplied and supported by Lights For You.

Questions
What size holes does it need?

Ø70–75 mm per aperture, from the shared frame datasheet — this listing records no diameter of its own. It also records no depth; we have taken 50 mm from the CELL-S1 and S2, which are that deep. Ask us and we will confirm both with Domus before anyone marks a ceiling.

Why use a three-light frame instead of three downlights?

Alignment. Setting out three downlights in a row and getting them level, parallel and evenly spaced is fiddly, and any error is visible for the life of the ceiling. The frame does it for you, and it reads as a deliberate detail rather than three holes — particularly over an island, a long bench or a reception desk.

Can I use different modules in the three apertures?

Yes, and it is one of the better reasons to use CELL. A 60° module in the centre for general light with 24° modules either side to pick out what is below is a common and effective arrangement. What you cannot do is aim them at wildly different targets, because all three share one aperture line — for that you want separate fittings.

Does it come with lights?

No — a frame is not a light. You need three CELL modules and their drivers: CELL-9 (9 W) or CELL-13 (13 W), in Trio or DALI. Three modules also means three drivers to house above a 290 mm frame, so check the void and tell us if it is tight.

How much clearance does it need?

Real clearance — at 290 mm long it has to sit between joists or battens rather than across one, and it needs to be set out square to the room. A long rectangular trim shows rotation in a way a round one hides, so an out-of-square run is visible from across the room.

Do the three modules have to be the same colour?

Not technically, but yes in practice. Three apertures 100 mm apart make a colour mismatch unmissable — far more obvious than the same difference between two downlights across a room. Set every module in one frame to the same colour temperature before they go up.

Can I mix it with the single and two-light frames?

Yes — all three take the same modules and the same aperture size, so they mix in one room and read as one family. A row of three over an island with singles elsewhere in the kitchen is a common arrangement and the trims match.

Product Specifications  
Product Specifications
x

Specifications

BrandDomus Lighting
Model / SKUsCELL-S3 — 27071 (Black) · 27070 (White)
TypeThree-light slotter frame for the CELL downlight module series — ⛔ not a light
Body290 × 100mm
Cutout per aperture⚠ Ø70–75mm — from the shared datasheet; this listing records no diameter
Depth⚠ 50mm — taken from the CELL-S1 and S2; this listing records no height
Apertures3
Modules⛔ Three sold separately, with three drivers — CELL-9 or CELL-13, Trio or DALI
Mixing modules✅ Supported — e.g. 60° centre with 24° either side
Aiming⚠ All three share one aperture line
Setting out⚠ A 290mm trim shows rotation — set it out square to the room
FinishesBlack · White — match to the modules
Warranty3 Years

Variant specifications

FrameAperturesBodySuits
CELL-S11100 × 100mmGeneral, repeated across a ceiling
CELL-S22190 × 100mmAn aligned pair — a bench, a bulkhead
✅ CELL-S3 (this)3290 × 100mmAn island, a long bench, a reception desk
Data Sheet & Manual  
Data Sheet & Manual
x

This browser does not support PDFs. Please download the PDF to view it: Download PDF.

Download Datasheet (PDF)

Warranties, Return & Refund Policy  
Warranties, Return & Refund Policy
x

Warranties

For all warranty claims please ensure you have your proof of purchase at hand, an invoice from your electrician from the installation and check the faulty product is within the applicable warranty period. Warranty is replacement only.

Lights For You is not responsible for damages caused by unprofessional installation, modified products or manipulated by the customer or by any other person not authorised by the manufacturer; as well as by improper use, manipulation and/or short circuits, apparent signs of improper treatment.

Faulty items: lodge warranty directly with the brand (manufacturer). Keep proof of purchase.

Damaged or Missing Items

Notification of any damages or missing items must be received by Lights For You within seven (7) days of receipt of the product. Please email photos to ashfield@lightsforyou.com.au.

If the product is to be repaired or replaced, it must correspond to the one originally sent by Lights For You and the customer must include the delivery note and/or invoice.

Returns

Change of Mind Returns

  • Customers who wish to return a product due to a change of mind or cancelled order may do so within thirty (30) days of receipt.
  • The customer is responsible for the shipping costs for a change of mind return, irrespective of any free, discounted or any other type of shipping promotion that may have been applicable at the time of your order. This includes any costs you incur for us shipping the product to you in the first place and the cost of shipping the product back to us.

Lodge a Return

You must lodge a return request via the below request form.

Excluded from Change of Mind

  • Clearance items
  • Discontinued items
  • Globes
  • Custom items
  • Made to Order (incl. custom cut profiles & LED strips)
  • Lamp shades
  • T4 fluorescent tubes
  • Gift cards

Credits will be issued in the form of store credit or gift voucher and will be equal to the price paid for the product minus the cost of shipping. Store credit vouchers are valid for six months from the date of issuance.

Our Rights

We reserve the right to refuse a return in cases where we cannot be reasonably satisfied that you purchased the product from us or where we are not responsible for the damage in accordance with our Faults & damages policy.

Cancellations

Customers who wish to cancel all or part of an order due to change of mind or incorrectly ordered may do subject to cancelling in within 12 hours, during business hours from time of purchase. Once products have been shipped, you cannot cancel them.

Your Options

  • Restocking fee: 20% will apply unless otherwise stated, or unless another order of equal or greater value is placed in lieu of this re-stocking fee.
  • Credit: will be issued in the form of store credit and will be equal to the price paid.

    Please refer to the following link to learn more about our policies

    Learn More
Compare color
  • black
  • white
Click on color/pattern to compare, click and drag images to reorder

Recently Viewed

Customers Also Bought

Vendor
Example product title
$68.00
$91.67
$68.00
Vendor
Example product title
$68.00
$91.67
$68.00
Vendor
Example product title
$68.00
$91.67
$68.00
Vendor
Example product title
$68.00
$91.67
$68.00
Vendor
Example product title
$68.00
$91.67
$68.00
Vendor
Example product title
$68.00
$91.67
$68.00
Vendor
Example product title
$68.00
$91.67
$68.00
Vendor
Example product title
$68.00
$91.67
$68.00
Vendor
Example product title
$68.00
$91.67
$68.00
Vendor
Example product title
$68.00
$91.67
$68.00