Blaze-Pro PIR Plug and Play Sensor Black and White

The BLAZE-PRO PIR is a plug-and-play motion sensor that converts a BLAZE-PRO floodlight into a sensor floodlight, IP65, in black or white.

Why a plug-in sensor beats a wired one

• ✅ No second device on the wall. A separate PIR head is another thing to aim, another thing to weather, and another thing that looks like an afterthought.
• ✅ It can be added later. Fit the floodlights now and decide about sensing after living with them — which is the right order, because most people over-specify sensing before they have seen the light in place.
• ✅ It can be removed just as easily, which matters if the sensor turns out to trigger on a neighbour's driveway.
• ⚠ It only fits BLAZE-PRO floodlights. It is not a general-purpose PIR.

Aiming it

• The sensor direction is adjustable independently of the floodlight. Loosen the M4 set screw with a 2 mm Allen key, turn the sensor, then tighten it.
• ✅ That independence is the useful part — you can point the light at a driveway and the sensor at the gate, so the light is already on when someone arrives rather than switching on once they are under it.
• A 5 mm Allen key removes the waterproof cover for battery access.
• ⚠ Re-seal the cover properly. The IP65 rating depends on it, and a sensor is mounted in exactly the position that gets weather.

Where sensing helps and where it annoys

• ✅ Driveways, side paths, back doors, garages — places you arrive at with your hands full.
• ✅ Deterrence. A light that comes on is more noticeable than one already on.
• ⚠ Not over an outdoor dining area. A sensor that switches off while people are sitting still is worse than no sensor at all.
• ⚠ Watch what else moves. A road, a neighbour's path, a washing line and large pets all trigger PIR sensors — which is why the detection angle matters and why being able to aim the sensor separately is worth having.

What we are not publishing

⛔ Detection range. Detection angle. Time delay. Lux threshold. Dimensions. Weight. Warranty. None of these exist in any source we hold.

We would rather say so than fill a specification table with plausible numbers — a sensor quoted at the wrong range is a light that never comes on when you want it.

Where it works

• ✅ On any BLAZE-PRO floodlight, via the built-in sensor adaptor interface.
• ✅ Driveways, side paths, back doors and garages.
• ✅ Retrofitted to floodlights already installed.
• ⛔ Not on other floodlights — it is a BLAZE-PRO accessory.
• ⛔ Not over outdoor dining or seating.
• ⚠ Not orderable on the spec alone — ask us for the detection figures first.

Specifying it

Plug-and-play PIR sensor accessory for Domus BLAZE-PRO floodlights. IP65. Black or white. Fits the sensor adaptor interface built into every BLAZE-PRO; no wiring required. Direction adjustable independently of the floodlight via an M4 set screw (2 mm Allen key); waterproof cover removed with a 5 mm Allen key. ⛔ Requires a CR2025 battery — not included.

⛔ Detection range, detection angle, time delay, lux threshold, dimensions, weight and warranty term are not recorded in any source. Ask us and we will obtain the detection figures from Domus before you order — they decide whether the light triggers at the gate or at the door.

Supplied and supported by Lights For You.

Download Datasheet (PDF)