Domus Lighting Bollard Lighting Accessories BL-A2-60 - 60mm Adaptor Accessory For BL-200/300 Series Bollard Head
Domus Lighting Bollard Lighting Accessories BL-A2-60 - 60mm Adaptor Accessory For BL-200/300 Series Bollard Head
Loading... + Add to wishlist - Remove from wishlist
Domus Lighting
SKU: 10725

BL-A2-60 - 60mm Adaptor Accessory For BL-200/300 Series Bollard Head

$28.95
$38.15
$28.95
Product Description  
Product Description
x

The Domus BL-A2-60 is a 60 mm adaptor for fitting a BL-200 or BL-300 series bollard head to a post, 70 × 70 × 30 mm.

⚠ Send us a photograph of your post before ordering this. An adaptor exists to bridge two things that do not otherwise fit, so the only question that matters is what is at each end — and the record for this part holds three dimensions and nothing else.

What we can tell you: it is 70 × 70 mm square, 30 mm deep, and it takes a BL-200 or BL-300 series head onto a 60 mm fixing.

What no source records: the material, the finish, how it fixes, whether any hardware is included, and the warranty term. There is no datasheet for this part.

A photograph of the post top and the head you are fitting settles it in one message. On a bollard job that is worth two minutes.

What an adaptor is doing in a bollard system
  • Bollard lighting is modular — a head, a post or spike, and the fixing between them. Domus sells the heads separately from the posts, which is why adaptors exist at all.
  • ✅ That modularity is genuinely useful: a damaged head can be replaced without digging out a post, and a post can be reused when a head is upgraded.
  • ⚠ It also means an order can be short a part and nobody notices until the installer is on site. Tell us the whole assembly you are building and we will list every piece of it.
  • ⚠ Naming in this range is not always reliable — two BL bollard listings were found with their descriptions swapped between them. Confirm parts by photograph, not by name.
Ordering the whole assembly
  • The head — BL-200 or BL-300 series.
  • This adaptor — if your post takes a 60 mm fixing.
  • The post or spike, and the fixing at ground level.
  • ⚠ Any one missing stops the job. Ask us to check the list before it ships.
What we are not publishing

⛔ Material, finish, fixing method, included hardware, weight, IP contribution and warranty. None of these appear in any source we hold, and on a part that carries a light fitting on top of a post they are not details to invent.

Where it works
  • ✅ Fitting a BL-200 or BL-300 series head to a 60 mm post fixing.
  • ✅ Replacing a damaged head on an existing post without excavation.
  • ⛔ Not confirmed for any other head series — ask us first.
  • ⚠ Not orderable from the title alone — send us a photo of the post top.
Specifying it

60 mm adaptor for Domus BL-200 / BL-300 series bollard heads. 70 × 70 × 30 mm.

⛔ No datasheet exists for this part. Material, finish, fixing method, included hardware, weight and warranty term are all unrecorded, and we are not publishing figures we cannot stand behind. Send us a photograph of the post top and the head you are fitting and we will confirm the correct part — and list anything else the assembly needs — before you order.

Supplied and supported by Lights For You.

Questions
Will it fit my post?

Send us a photograph of the post top and we will tell you. It takes a BL-200 or BL-300 series head onto a 60 mm fixing and it is 70 × 70 × 30 mm — beyond that, the record for this part holds three dimensions and nothing else, and there is no datasheet. A photo settles it in one message, which on a bollard job is worth two minutes.

What is it made of?

Not recorded in any source we hold, and we are not going to guess on a part that carries a light fitting on top of a post outdoors. Ask us and we will get it from Domus. The rest of the BL bollard range is aluminium, but that is an inference rather than a specification for this piece.

What else do I need to complete a bollard?

A head from the BL-200 or BL-300 series, this adaptor if your post takes a 60 mm fixing, and the post or spike with its ground fixing. Any one of those missing stops the job on the day. Tell us the whole assembly you are building and we will list every piece before it ships.

Does it come with fixing hardware?

Not recorded. No source states whether screws or bolts are included. Ask us and we will confirm with Domus rather than have your installer discover it on site.

Can I use it with a different head?

It is specified for the BL-200 and BL-300 series and we cannot confirm anything beyond that from the data we hold. Ask us before ordering it for another head — and confirm the head by photograph rather than by name, because two listings in this bollard family were found with their descriptions swapped between them.

Why can I replace just the head?

Because Domus sells bollard lighting as a modular system — head, post and the fixing between them. That means a damaged head can be replaced without digging out a post, and a post can be reused when the head is upgraded. It is a genuine advantage; the trade-off is that an order can be short a part.

What warranty does it have?

Not recorded on this listing at all. Ask us and we will confirm it with Domus in writing before you order.

Product Specifications  
Product Specifications
x

Specifications

BrandDomus Lighting
Model / SKUsBL-A2-60 — 10725
TypeAdaptor for BL-200 / BL-300 series bollard heads
Fixing size60mm
Dimensions70 × 70 × 30mm
Material⛔ Not recorded — ask us
Finish⛔ Not recorded
Fixing method / hardware⛔ Not recorded — send us a photo of the post top
Datasheet⛔ None exists in any source we hold
Compatible headsBL-200 and BL-300 series only, as far as any source states
Warranty⛔ Not recorded — ask us

Variant specifications

Part of the assemblyWhat to confirmHow
Bollard headBL-200 or BL-300 seriesPhotograph — names in this range have been unreliable
This adaptorYour post takes a 60mm fixingPhotograph of the post top
Post or spike + ground fixingOrdered and in stockAsk us to check the full list
Warranties, Return & Refund Policy  
Warranties, Return & Refund Policy
x

Warranties

For all warranty claims please ensure you have your proof of purchase at hand, an invoice from your electrician from the installation and check the faulty product is within the applicable warranty period. Warranty is replacement only.

Lights For You is not responsible for damages caused by unprofessional installation, modified products or manipulated by the customer or by any other person not authorised by the manufacturer; as well as by improper use, manipulation and/or short circuits, apparent signs of improper treatment.

Faulty items: lodge warranty directly with the brand (manufacturer). Keep proof of purchase.

Damaged or Missing Items

Notification of any damages or missing items must be received by Lights For You within seven (7) days of receipt of the product. Please email photos to ashfield@lightsforyou.com.au.

If the product is to be repaired or replaced, it must correspond to the one originally sent by Lights For You and the customer must include the delivery note and/or invoice.

Returns

Change of Mind Returns

  • Customers who wish to return a product due to a change of mind or cancelled order may do so within thirty (30) days of receipt.
  • The customer is responsible for the shipping costs for a change of mind return, irrespective of any free, discounted or any other type of shipping promotion that may have been applicable at the time of your order. This includes any costs you incur for us shipping the product to you in the first place and the cost of shipping the product back to us.

Lodge a Return

You must lodge a return request via the below request form.

Excluded from Change of Mind

  • Clearance items
  • Discontinued items
  • Globes
  • Custom items
  • Made to Order (incl. custom cut profiles & LED strips)
  • Lamp shades
  • T4 fluorescent tubes
  • Gift cards

Credits will be issued in the form of store credit or gift voucher and will be equal to the price paid for the product minus the cost of shipping. Store credit vouchers are valid for six months from the date of issuance.

Our Rights

We reserve the right to refuse a return in cases where we cannot be reasonably satisfied that you purchased the product from us or where we are not responsible for the damage in accordance with our Faults & damages policy.

Cancellations

Customers who wish to cancel all or part of an order due to change of mind or incorrectly ordered may do subject to cancelling in within 12 hours, during business hours from time of purchase. Once products have been shipped, you cannot cancel them.

Your Options

  • Restocking fee: 20% will apply unless otherwise stated, or unless another order of equal or greater value is placed in lieu of this re-stocking fee.
  • Credit: will be issued in the form of store credit and will be equal to the price paid.

    Please refer to the following link to learn more about our policies

    Learn More

Recently Viewed

Customers Also Bought

Vendor
Example product title
$28.95
$38.15
$28.95
Vendor
Example product title
$28.95
$38.15
$28.95
Vendor
Example product title
$28.95
$38.15
$28.95
Vendor
Example product title
$28.95
$38.15
$28.95
Vendor
Example product title
$28.95
$38.15
$28.95
Vendor
Example product title
$28.95
$38.15
$28.95
Vendor
Example product title
$28.95
$38.15
$28.95
Vendor
Example product title
$28.95
$38.15
$28.95
Vendor
Example product title
$28.95
$38.15
$28.95
Vendor
Example product title
$28.95
$38.15
$28.95