Domus ZEKE-PRO 8 Sm IP65 8W TRIO 24V

The Domus ZEKE-PRO-8 surface-mounted, 24 V is a low-voltage surface step light — 12/24 V DC, 8 W, 421–495 lumens, CRI ≥90, IP65, dimmable, in black or white.

⭐⭐⭐ Its record is correct — and that is what proves its siblings' wrong

• ⭐ This product publishes voltage = 12V~24V and ac_dc = DC. ⭐ Correct, and it matches its datasheet.
• ⛔ ITS ZEKE-PRO-5 SIBLINGS (10335, 10337) PUBLISH 240V AND AC FOR THE IDENTICAL SUPPLY, ⭐ from sheets that also say 12/24 V DC.
• ⭐⭐ SAME FAMILY. SAME SUPPLY. ONE RECORDED RIGHT AND TWO RECORDED WRONG.
• ⭐ THAT MATTERS BEYOND THIS PRODUCT, because it rules out the one innocent explanation. ⭐ A record reading 240 V on a DC fitting might have been a house convention — a field always filled with the mains figure regardless of the product. ⭐ It is not.
• ⭐ CATALOGUE-WIDE: of 88 products whose datasheet states a DC supply, 64 record a low voltage correctly and 14 record 240 V. ⭐ The correct ones take three clean forms — 24V (38 products), 12V (15) and 12V~24V (11).
• ⭐⭐ SO THE 64 CORRECT RECORDS PROVE THE 14 ARE ERRORS. ⚠ If you are buying a low-voltage fitting from this catalogue, check the voltage field against the title — most agree, and where they do not, the title is right.

⭐ The largest surface unit, and it dims

• ⭐ 8 W, 421/462/495 lm — the brightest in the family — and dimmable with a dimmable driver.
• ⭐⭐ THAT COMBINATION IS THE ONE TO WANT HERE, because the 240 V version of this same fitting is the one most likely to end up too bright. ⭐ A surface fitting sits proud of the wall, so its source is less shielded than a recessed one's, and at 495 lm with no dimmer you are committing to a level you can only judge on site at night.
• ⭐ THIS VERSION LETS YOU CORRECT IT AFTERWARDS. ⭐ Over-brightness is the commonest fault in low-level lighting, and a dimmer fixes it without changing fittings.
• ⭐ All 6 low-voltage step lights in the range dim. ⚠ But 4 of 10 mains ones do too, so low voltage guarantees the option rather than being the only route to it.

⭐ 3000 K is also the dimmest setting

⭐ 421 lm at 3000 K, 462 at 4000, 495 at 5000. ⭐⭐ THE WARMEST SETTING IS ABOUT 15% DIMMER THAN THE COOLEST, which means the aesthetic choice and the brightness choice point the same way. ⭐ 3000 K flatters stone, brick and planting where 5000 K reads as institutional — and it is the quieter output. ⭐ With a dimmer as well you have two independent levers, which is more control than any other fitting in this family offers. ⚠ The colour is switchable on the fitting, so set every unit the same way at installation — a run at mixed colour temperatures is very obvious at night.

⭐ The driver, sized for 8 W each

• ⭐ A 12/24 V DC constant-voltage driver, wired in parallel — each fitting draws its own 8 W from a shared voltage, so one driver runs several and a failure does not propagate.
• ⭐⭐ AT 8 W EACH THESE ADD UP FASTER THAN THE 5 W UNITS: six is 48 W, which needs a 100 W driver for sensible headroom. ⭐ A driver at full load is the component that fails, and it fails years before the LEDs.
• ⚠ CHECK VOLTAGE DROP ON A LONG RUN. ⭐ At 24 V, cable resistance matters over distances that are irrelevant at 240 V, and the far fitting going dim is the usual symptom. ⭐ Running at 24 V rather than 12 V halves the current for the same power and roughly quarters the drop, so prefer 24 V on anything long.
• ⚠ SITE THE DRIVER SOMEWHERE REACHABLE. ⭐ It is the part most likely to need replacing.

⭐ Surface mounting, and what it saves on the 8 W

⭐ Same engine as the recessed ZAC-PRO-8, with the same output and CRI. ⭐⭐ THE SAVING IS LARGEST ON THIS SIZE, because the recessed 8 W needs a 210 × 60 mm cutout — longer than a brick is tall, crossing a mortar course, and genuinely difficult to core after the fact. ⭐ The surface version needs a cable and two fixings. ⭐ It is also reversible: a surface fitting in the wrong place leaves two holes where a recessed one leaves a hole to patch. ⚠ The costs are that it projects — keep it out of the walking line — and that it is visible in daylight, where black recedes against most masonry and white announces itself.

⛔ And its application field says "Indoor"

⭐ On an IP65 fitting whose own description calls it useful for external pathways. ⭐ Measured: 78 products rated IP65 or better publish application = Indoor. ⚠ Harmless on a page someone reads; misleading in a filter. ⭐ So this product gets one field right that its siblings get wrong, and one field wrong that most of the catalogue gets wrong.

✅ What is published

Where it works

• ⭐⭐ Where the recessed 8 W cutout is impossible — ⭐ no 210 mm slot.
• ⭐ Where the level is uncertain — ⭐ it dims, and 3000 K is quieter still.
• ⭐ Runs of several fittings — ⭐ one driver, wired in parallel.
• ⚠ Not on 12 V over a long run — ⭐ take 24 V.
• ⚠ Not in the walking line — ⭐ it projects.

Specifying it

Surface-mounted LED step light, 8 W. 12/24 V DC. 421/462/495 lm at 3000/4000/5000 K switchable. CRI ≥90, 120° beam. IP65. Dimmable with a dimmable driver. Requires a 12/24 V DC constant-voltage driver, wired in parallel. Cast aluminium, chromate-treated, TPS cable gland. 50,000 hrs. ⭐⭐⭐ ITS VOLTAGE RECORD IS CORRECT — 12V~24V and DC — AND THAT IS WHAT PROVES ITS SIBLINGS' WRONG. The ZEKE-PRO-5 versions publish 240 V AC for the identical supply, from sheets that also say 12/24 V DC. Same family, same supply, one recorded right and two recorded wrong, which rules out the one innocent explanation: that 240 V is simply what this catalogue puts in the field regardless of the product. ⭐ CATALOGUE-WIDE, 64 OF 88 DC PRODUCTS RECORD A LOW VOLTAGE CORRECTLY, in three clean forms. The 64 prove the 14 are errors.

Supplied and supported by Lights For You.

Download Datasheet (PDF)