DOMUS SUSP 2M KIT / STS (EACH)

The Domus SUSP 2M KIT is a 2 metre suspension kit for track and linear fittings — sold each.

⛔⛔ Its length field says 2 mm. It is a two-metre kit.

• ⭐ The product record publishes length = 2 mm on a product whose own title says 2M. ⭐ Two metres recorded as two millimetres — a factor of a thousand.
• ⭐ WE CHECKED THE OTHER SUSPENSION KITS, AND NOT ONE RECORDS ITS ACTUAL LENGTH:

• ⭐⭐ THE TWO TRAK-3 KITS RECORD THE SAME 100 mm FOR DIFFERENT LENGTHS. ⭐ That is the detail that settles what is happening: the field is not recording the suspension length at all. ⭐ It is probably a packaging or component dimension.
• ⭐ THE PRACTICAL EFFECT IS THAT YOU CANNOT SORT OR FILTER THESE BY DROP, ⭐ and a specification table built from the record would be wrong on every one of them. ⭐ THE TITLE IS THE RELIABLE SOURCE HERE. ⭐ This kit suspends 2 metres.

⭐ What a suspension kit is for, and why the length is the whole specification

• ⭐ A suspension kit hangs a track or a linear fitting below the ceiling on adjustable wires or rods, with the electrical feed running down with it.
• ⭐⭐ THE DROP LENGTH IS ESSENTIALLY THE ONLY THING TO CHOOSE — ⭐ which is what makes a wrong length field more consequential here than on most products.
• ⭐ KITS ARE ADJUSTABLE DOWNWARD, NOT UPWARD. ⭐ A 2 m kit can be set to hang at 600 mm; it cannot be made to reach 2.5 m. ⭐ SO BUY LONG AND SHORTEN — the excess wire is trimmed or coiled at the canopy.
• ⭐ Sold each — ⚠ and a track or linear fitting needs at least two. ⭐ A long run needs one roughly every 1.5 to 2 metres to stop it sagging, so count the kits against the run length before ordering.

⭐ Choosing the drop

• ⭐ IN A COMMERCIAL SPACE WITH A HIGH CEILING, the usual aim is to bring the fitting to 2.4 to 3 m above the floor — ⭐ low enough to light the working plane properly, high enough to stay out of the way. ⭐ From a 4.5 m ceiling that is a 1.5 to 2 m drop, which is what this kit is for.
• ⭐ OVER A RETAIL DISPLAY OR A COUNTER you may want it lower still — ⭐ but check the sightline across the space; a suspended run at 2.2 m cuts a room visually in a way it does not at 2.8.
• ⚠ IN A SPACE WITH AIR CONDITIONING OR SPRINKLERS, CHECK THE CLEARANCES FIRST. ⭐ A suspended fitting below a sprinkler head can affect its spray pattern, which is a compliance question rather than a preference.

⛔ What is not published

⭐ No datasheet is attached to this product, and beyond the length there is no published information: no cable type, no maximum supported weight, no compatible fitting list, and no warranty. ⭐⭐ THE WEIGHT LIMIT IS THE ONE WORTH HAVING — ⭐ a suspension kit rated for a light track is not necessarily rated for a loaded three-circuit track with a dozen heads on it. ⭐ Tell us what you are hanging and how long the run is, and we will confirm the kit suits before you order.

✅ What is published

Where it works

• ⭐ Commercial ceilings of 3.5–4.5 m — ⭐ brings fittings to 2.4–3 m.
• ⭐ Track runs and linear fittings.
• ⭐ Where a shorter drop may be wanted later — ⭐ it shortens.
• ⚠ Not singly — ⭐ a fitting needs at least two.
• ⚠ Not below a sprinkler head without checking clearances.

Specifying it

2 metre suspension kit for track and linear fittings. Sold each. Adjustable downward. ⛔⛔ ITS LENGTH FIELD READS 2 mm ON A TWO-METRE KIT — a factor of a thousand. And it is not isolated: across four suspension kits in this catalogue, NOT ONE records its actual length, and the two TRAK-3 kits at 1.5 m and 3.0 m record the SAME 100 mm. That is what settles it — the field is not recording the suspension length at all. ⭐ THE TITLE IS THE RELIABLE SOURCE: this kit suspends 2 metres. ⭐ BUY LONG AND SHORTEN, because kits adjust downward and not up.

Supplied and supported by Lights For You.