PINTA 10 LIGHT PENDANT

The Pinta PE10 is an 820 mm ten-light pendant built from illuminated acrylic rods — 3 W each, 30 W total, 1,164 lm at 3000 K — in black or gold.

Ten rods in the same 820 mm frame

This is the useful distinction from its sibling. The eight-rod Pinta is the same 820 × 250 mm size — the ten simply packs two more rods into the same envelope. So you get a denser, brighter composition in an identical footprint, and the two hang at matching heights if you use both in one room.

Rods, not shades — and that is the design

The sources are acrylic rods rather than globes behind shades. Each glows along its whole length, so the fitting reads as a group of lit lines suspended in space instead of ten bright points. From below it is graphic; from the side it has depth. Nothing else in this range does it.

1,164 lumens — and how we know

Our sources disagree on the output for both Pintas, and they disagree in opposite directions. The physics settles it: 1,164 lm from 30 W here and 965 lm from 24 W on the eight is the same rods working equally hard — about 39 lumens per watt in both cases. The alternative pairing would have the same component performing 50% better in one fitting than the other, which it cannot.

Black or gold — and the frame is what you see by day

With rods rather than shades, the metal frame is the object when the fitting is off. Black is graphic and lets the lit rods dominate at night; gold is warm and reflective, so the fitting stays present in daylight too.

Wide and shallow

820 mm across, 250 mm deep, on a 1,500 mm suspension — shorter than the 2 m most of this range carries. Over a standard ceiling that is ample; tell us if you have a raked or double-height space.

The LEDs are integrated

Included, so nothing to buy and nothing to match across ten visible rods — which on a fitting like this genuinely matters. Not dimmable.

Where it works

• Rectangular dining tables and long islands.
• Entry halls, seen from below and from the side.
• Contemporary and graphic interiors.
• Where the eight-rod Pinta is not quite enough.

Specifying it

820 mm wide, 250 mm high, suspension 1,500 mm, canopy projection 35 mm, in iron and acrylic. Ten integrated LED rods at 3 W each — 30 W total, 1,164 lm at 3000 K, included. Not dimmable. 240 V, Class I — earth required, IP20 — indoor and dry locations only. Warranty is three years, as a replacement warranty.

Supplied and supported by Lights For You.

Download Datasheet (PDF)