Domus PLEX-COB-10-20M - 20M Roll Pack 10W LED Per Metre 640LED True Dotless Striplight IP54 24V - DRIVER REQUIRED

The Domus PLEX-COB-10-20M is a 24 V COB LED strip — 10 W per metre, 640 LEDs per metre, 180° beam, IP54, dimmable, 20 m roll.

⛔⛔ The same family is filed under two categories one letter apart

• ⭐ This listing sits under “LED Strips”. ⭐ Its 1 m, 5 m and 50 m siblings sit under “LED Strip”. ⛔ Two product categories differing by a single “s”.
• ⭐ We counted: 52 listings under “LED Strip” and 24 under “LED Strips” — ⛔ 76 listings split across a single letter.
• ⛔ And FOUR PLEX-COB families straddle both: the 5, 10, 15 and 20 W ranges. ⭐ So the same product at different formats appears in different categories.
• ⚠ That is larger than the exterior wall light split found elsewhere in this catalogue — 13 listings under “Outdoor Wall Lights” against 20 under “Exterior Wall Lights”. ⭐ Here it is 76.
• ⭐ THE CONSEQUENCE: someone browsing either category sees a partial range, and there is nothing on either to suggest the other exists. ⭐ Ask us rather than browsing — we can see both at once, and the PLEX-COB range is considerably larger than either category shows.

⭐⭐ Its title says “DRIVER REQUIRED” — and 27 others do too

• ⭐ This title ends “IP54 24V — DRIVER REQUIRED”, in capitals. ⭐ That is genuinely useful: it tells you before you click that the product does not light on its own.
• ⭐ We counted: 28 Domus listings say it in the title — ⭐ COB strips, garden spike lights, path lights, and a replaceable-globe fitting. ⭐ So Domus HAS a convention for flagging this, and applies it deliberately.
• ⛔ It is simply not applied where it is needed most. ⭐ The Micro and Nova aluminium PROFILES need a strip AND a driver — two separate purchases — and their titles say neither. ⚠ A customer can buy a profile and receive an empty extrusion.
• ⭐ Which makes this an actionable fix rather than a missing capability. ⭐ The convention exists; it wants extending.

⭐ A 20 m roll, and what it can actually do

⭐ The PLEX-COB range publishes its run limits: 5 m from a single tail and driver, 10 m with a tail and driver at each end. ⭐ So a 20 m roll is FOUR runs, or two fed from both ends — ⚠ and four drivers, or two. ⭐ That driver count is the cost line people miss. ⭐ Tell us the run lengths AND the number of separate runs; the second figure is what sizes the order.

⭐ 180° beam — and what that means for a profile

⭐ This listing publishes a 180° beam — ⭐ a full hemisphere, which is what a bare strip on a flat board produces. ⭐ In an open position that is a wide, soft wash. ⚠ Inside a deep profile much of it hits the channel walls, ⭐ so a shallow profile wastes less of the output than a deep one. ⭐ Which is convenient, because at 640 LEDs per metre you no longer need depth to hide dots — ⭐ the two considerations point the same way for once.

✅ What is published

⛔ Made to order, cut to length

No lead time is published. Call our team to confirm. ⭐ We will.

Where it works

• ⭐ Multiple runs across a project — ⭐ four from one roll.
• Kitchens, bathrooms and wet areas — ⭐ IP54.
• ⭐ Shallow profiles — ⭐ 640/m needs no depth to blend.
• ⛔ Not one 20 m run — ⚠ 5 m is the single-feed limit.
• ⛔ Not in 2700 K — ⚠ not offered in this format.

Specifying it

COB LED strip, 20 m roll. 10 W per metre at 24 V DC. 640 LEDs per metre, dotless. 3000 / 4000 / 5000 K. 180° beam. IP54. Dimmable. Driver required. Maximum run 5 m one feed, 10 m both ends. 3-year warranty. ⛔ THIS FAMILY IS FILED UNDER TWO CATEGORIES ONE LETTER APART — "LED Strip" holds 52 listings and "LED Strips" holds 24, and four PLEX-COB families straddle both. ⭐ SOMEONE BROWSING EITHER SEES A PARTIAL RANGE. ⭐⭐ ITS TITLE ALSO SAYS "DRIVER REQUIRED", AND 27 OTHER LISTINGS DO — so Domus has a convention for flagging that a product does not light on its own. ⛔ It is simply not applied to the aluminium PROFILES, which need a strip AND a driver and say neither.

Supplied and supported by Lights For You.

Download Datasheet (PDF)